If you know a renovation is on the horizon, it’s time to call in favors from those handy family and friends. Give them ample time to arrange their schedule to help and provide plenty of reminders as the project approaches. (An offer of free food also helps!) If hiring a contractor, make sure you allow enough lead time to snag your desired timeline, otherwise you could be stuck waiting on them. Consider a message center to keep everyone informed as they come and go to make life easier on everyone.
Many homeowners consider obtaining a building permit as an unnecessary headache which can slow down the renovation process, but permits are a necessary part of the process in most cases, which can come back to haunt you if not obtained in the first place. Building permits are necessary to ensure your house remodel meets structural and fire safety requirements and code inspectors in most jurisdictions can make you rip out non-conforming work if not up to snuff. This can create a very expensive headache when looking to sell your home down the road. It’s always advisable to think ahead and ensure the permit process is followed. Check out our DIY home improvement rules for more tips.
Save energy bill greenbacks by going green with a solar water heater. The installed price can cost up to $5,000, but these systems can slash your hot water bills by as much as 80 percent and attract energy-conscious homebuyers should you decide to sell. Install a solar water heater where there's unobstructed southern exposure and you'll have savings made in the shade.
A great room to update for less than $750 is the bathroom. The two rooms that benefit most from even small renovations are the kitchen and bathroom. One cost-effective change — like replacing an outdated vanity, old plumbing and lighting fixtures or adding a new tile floor — will guarantee a lot of bang for your buck and give your bath an updated, modern look.
The best place to start with any remodeling project is the budget. Not only will it have a big impact on the type of materials you select for your bathroom renovation, it will also help you set the boundaries of your design. Knowing what you can really afford to spend will make it a lot easier to decide what items you want to replace and where you need to get creative!
It really helped when you said that getting an efficient lighting design can help eliminate shadows on faces. That was a common problem we have in our bathroom before. It was too dark and my husband easily gets cuts when shaving. With this bathroom improvement project, I’d be sure to get help from a professional so we can remedy this lighting issue. Thanks for the very helpful tip!
That’s a great point that good bathroom lighting will eliminate shadows on your face in the mirror. That would be really nice because then you wouldn’t ever be frustrated about not being able to see parts of your face well. We are thinking of doing a bathroom remodel, and the lighting is the top priority on my list because our current lighting is quite dim.
We installed a 1″ hex porcelain tile backsplash (Home Depot) using OMNIGrip premixed tile adhesive (Home Depot). OMNIGrip is similar to thinset mortar, but it’s better for use in RV’s because of its flexibility and strength. To finish off this the backsplash project, we grouted between the tiles with premixed grout in the color Alabaster (Home Depot) to perfectly matches the walls.
Learning which items to spend your money on goes hand-in-hand with making a realistic budget and determining a sensible scope of work. The earlier you can make this determination, the more likely you will stay on track with costs. Think about which items you will use most frequently, as these are products that might be worth the higher price-tag. If you're on a tight budget, you might want to save on cosmetic finishings, as these items can be easily changed with time.

I really appreciate your awesome 7 must-know bathroom remodeling tips! At the moment, I am helping my sister in renovating their bathroom. I am gathering more ideas on how could I help her and I definitely agree that considering the use of a heated floor, maximizing the space and choosing an appropriate, yet durable flooring will make it done perfectly!
Existing conditions in a house can radically change the budget and scope of a renovation, as sometimes something as seemingly simple as adding an additional outlet to a room can result in the rewiring of an entire home. If you know, for example, that you occasionally blow a fuse when you turn on your hairdryer and have the dryer going on at the same time, that should be a hint that you may need to upgrade your electrical system. 
Unfortunately, when it comes to bathroom remodeling, a lot of homeowners tend to neglect this aspect. What they are not aware of is the fact that proper ventilation is very important, especially if you want to ensure that your bathroom renovation project lasts for years to come. A bathroom that’s not properly ventilated could contribute to a number of problems, such as the buildup of mold and mildew. This could wreak havoc and ruin some of the expensive upgrades made in the new bathroom remodel, such as the floors, walls, and even the cabinetry.
Consider installing a whole-house fan. They're a great alternative to air conditioning because they use only one-tenth the electricity of air conditioners, saving you money. Whole-house fans are considered a "green" home improvement, which is a popular selling feature with today's homebuyers. As the cost of electricity continues to skyrocket, green energy alternatives will only gain in popularity.
Quick question – what’s the process & best-approach for hanging overhead cabinets on the RV walls? The Kodiak is a fiberglass-over-aluminum frame type. Recommendations for sourcing the new cabinets? I noticed in your blog, what looks like vertical bedroom walls (the headboard), we have the “sloped-away” type – probably a 20 degree-off-vertical angle that I will have to contend with.

We installed a 1″ hex porcelain tile backsplash (Home Depot) using OMNIGrip premixed tile adhesive (Home Depot). OMNIGrip is similar to thinset mortar, but it’s better for use in RV’s because of its flexibility and strength. To finish off this the backsplash project, we grouted between the tiles with premixed grout in the color Alabaster (Home Depot) to perfectly matches the walls.


Due to the proximity of the bedroom to one’s bathroom, noise is usually an issue for most homeowners. If there aren’t any windows attached to the bathroom, an exhaust fan should be installed as it can help in removing moisture. Likewise, if you want to reduce the noise made by your toilet tank while it’s being refilled, then you should install a modern inlet valve.
×